/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/* ***** BEGIN LICENSE BLOCK *****
 * Version: MPL 1.1/GPL 2.0/LGPL 2.1
 *
 * The contents of this file are subject to the Mozilla Public License Version
 * 1.1 (the "License"); you may not use this file except in compliance with
 * the License. You may obtain a copy of the License at
 * http://www.mozilla.org/MPL/
 *
 * Software distributed under the License is distributed on an "AS IS" basis,
 * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
 * for the specific language governing rights and limitations under the
 * License.
 *
 * The Original Code is mozilla.org code.
 *
 * The Initial Developer of the Original Code is Mozilla Foundation
 * Portions created by the Initial Developer are Copyright (C) 2008
 * the Initial Developer. All Rights Reserved.
 *
 * Contributor(s):
 *  Robert Strong <robert.bugzilla@gmail.com>
 *
 * Alternatively, the contents of this file may be used under the terms of
 * either the GNU General Public License Version 2 or later (the "GPL"), or
 * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
 * in which case the provisions of the GPL or the LGPL are applicable instead
 * of those above. If you wish to allow use of your version of this file only
 * under the terms of either the GPL or the LGPL, and not to allow others to
 * use your version of this file under the terms of the MPL, indicate your
 * decision by deleting the provisions above and replace them with the notice
 * and other provisions required by the GPL or the LGPL. If you do not delete
 * the provisions above, a recipient may use your version of this file under
 * the terms of any one of the MPL, the GPL or the LGPL.
 *
 * ***** END LICENSE BLOCK ***** */

#include <stdio.h>
#include <stdlib.h>
#include <windows.h>
// Support for _setmode
#include <fcntl.h>
#include <io.h>

#include "nsWindowsRestart.cpp"

// CommandLineToArgvW may return different values for argv[0] since it contains
// the path to the binary that was executed so we prepend an argument that is
// quoted with a space to prevent argv[1] being appended to argv[0].
#define DUMMY_ARG1 L"\"arg 1\" "

#define MAXPATHLEN 1024
#define LOG_PREFIX L"XRE MakeCommandLine"
#define MAX_TESTS 100

// Verbose output can be enabled by defining VERBOSE 1
#define VERBOSE 0

// Compares compareCmdLine with the output of MakeCommandLine. This is
// accomplished by converting inCmdLine to an argument list with
// CommandLineToArgvW and converting it back to a command line with
// MakeCommandLine.
static int
verifyCmdLineCreation(PRUnichar *inCmdLine,
                      PRUnichar *compareCmdLine,
                      PRBool passes, int testNum)
{
  int rv = 0;
  int i;
  int inArgc;
  int outArgc;
  PRBool isEqual;

  // When debugging with command lines containing Unicode characters greater
  // than 255 you can set the mode for stdout to Unicode so the console will
  // receive the correct characters though it won't display them properly unless
  // the console's font has been set to one that can display the characters. You
  // can also redirect the console output to a file that has been saved as Unicode
  // to view the characters.
//  _setmode(_fileno(stdout), _O_WTEXT);

  // Prepend an additional argument to the command line. CommandLineToArgvW
  // handles argv[0] differently than other arguments since argv[0] is the path
  // to the binary being executed and MakeCommandLine only handles argv[1] and
  // larger.
  PRUnichar *inCmdLineNew = (PRUnichar *) malloc((wcslen(DUMMY_ARG1) + wcslen(inCmdLine) + 1) * sizeof(PRUnichar));
  wcscpy(inCmdLineNew, DUMMY_ARG1);
  wcscat(inCmdLineNew, inCmdLine);
  LPWSTR *inArgv = CommandLineToArgvW(inCmdLineNew, &inArgc);

  PRUnichar *outCmdLine = MakeCommandLine(inArgc - 1, inArgv + 1);
  PRUnichar *outCmdLineNew = (PRUnichar *) malloc((wcslen(DUMMY_ARG1) + wcslen(outCmdLine) + 1) * sizeof(PRUnichar));
  wcscpy(outCmdLineNew, DUMMY_ARG1);
  wcscat(outCmdLineNew, outCmdLine);
  LPWSTR *outArgv = CommandLineToArgvW(outCmdLineNew, &outArgc);

  if (VERBOSE) {
    wprintf(L"\n");
    wprintf(L"Verbose Output\n");
    wprintf(L"--------------\n");
    wprintf(L"Input command line   : >%s<\n", inCmdLine);
    wprintf(L"MakeComandLine output: >%s<\n", outCmdLine);
    wprintf(L"Expected command line: >%s<\n", compareCmdLine);

    wprintf(L"input argc : %d\n", inArgc - 1);
    wprintf(L"output argc: %d\n", outArgc - 1);

    for (i = 1; i < inArgc; ++i) {
      wprintf(L"input argv[%d] : >%s<\n", i - 1, inArgv[i]);
    }

    for (i = 1; i < outArgc; ++i) {
      wprintf(L"output argv[%d]: >%s<\n", i - 1, outArgv[i]);
    }
    wprintf(L"\n");
  }

  isEqual = (inArgc == outArgc);
  if (!isEqual) {
    wprintf(L"*** TEST-%s-FAIL | %s ARGC Comparison | Test %2d\n",
            passes ? L"UNEXPECTED" : L"KNOWN", LOG_PREFIX, testNum);
    if (passes) {
      rv = 1;
    }
    LocalFree(inArgv);
    LocalFree(outArgv);
    free(inCmdLineNew);
    free(outCmdLineNew);
    free(outCmdLine);
    return rv;
  }

  for (i = 1; i < inArgc; ++i) {
    isEqual = (wcscmp(inArgv[i], outArgv[i]) == 0);
    if (!isEqual) {
      wprintf(L"*** TEST-%s-FAIL | %s ARGV Comparison | Test %2d\n",
              passes ? L"UNEXPECTED" : L"KNOWN", LOG_PREFIX, testNum);
      if (passes) {
        rv = 1;
      }
      LocalFree(inArgv);
      LocalFree(outArgv);
      free(inCmdLineNew);
      free(outCmdLineNew);
      free(outCmdLine);
      return rv;
    }
  }

  isEqual = (wcscmp(outCmdLine, compareCmdLine) == 0);
  if (!isEqual) {
    wprintf(L"*** TEST-%s-FAIL | %s Command Line Comparison | Test %2d\n",
            passes ? L"UNEXPECTED" : L"KNOWN", LOG_PREFIX, testNum);
    if (passes) {
      rv = 1;
    }
    LocalFree(inArgv);
    LocalFree(outArgv);
    free(inCmdLineNew);
    free(outCmdLineNew);
    free(outCmdLine);
    return rv;
  }

  if (rv == 0) {
    if (passes) {
      wprintf(L"*** TEST-PASS | %s | Test %2d\n", LOG_PREFIX, testNum);
    } else {
      wprintf(L"*** TEST-UNEXPECTED-PASS | %s | Test %2d\n", LOG_PREFIX, testNum);
      rv = 1;
    }
  }

  LocalFree(inArgv);
  LocalFree(outArgv);
  free(inCmdLineNew);
  free(outCmdLineNew);
  free(outCmdLine);
  return rv;
}

int wmain(int argc, PRUnichar *argv[])
{
  int i;
  int rv = 0;

  if (argc > 1 && (_wcsicmp(argv[1], L"-check-one") != 0 ||
                   _wcsicmp(argv[1], L"-check-one") == 0 && argc != 3)) {
    fwprintf(stderr, L"Displays and validates output from MakeCommandLine.\n\n");
    fwprintf(stderr, L"Usage: %s -check-one <test number>\n\n", argv[0]);
    fwprintf(stderr, L"  <test number>\tSpecifies the test number to run from the\n");
    fwprintf(stderr, L"\t\tTestXREMakeCommandLineWin.ini file.\n");
    return 255;
  }

  PRUnichar inifile[MAXPATHLEN];
  if (!::GetModuleFileNameW(0, inifile, MAXPATHLEN)) {
    wprintf(L"*** TEST-FAIL | %s | GetModuleFileNameW\n", LOG_PREFIX);
    return 2;
  }

  WCHAR *slash = wcsrchr(inifile, '\\');
  if (!slash) {
    wprintf(L"*** TEST-FAIL | %s | wcsrchr\n", LOG_PREFIX);
    return 3;
  }

  wcscpy(slash + 1, L"TestXREMakeCommandLineWin.ini\0");

  for (i = 0; i < MAX_TESTS; ++i) {
    PRUnichar sInputVal[MAXPATHLEN];
    PRUnichar sOutputVal[MAXPATHLEN];
    PRUnichar sPassesVal[MAXPATHLEN];
    PRUnichar sInputKey[MAXPATHLEN];
    PRUnichar sOutputKey[MAXPATHLEN];
    PRUnichar sPassesKey[MAXPATHLEN];

    if (argc > 2 && _wcsicmp(argv[1], L"-check-one") == 0 && argc == 3) {
      i = _wtoi(argv[2]);
    }

    _snwprintf(sInputKey, MAXPATHLEN, L"input_%d", i);
    _snwprintf(sOutputKey, MAXPATHLEN, L"output_%d", i);
    _snwprintf(sPassesKey, MAXPATHLEN, L"passes_%d", i);

    if (!GetPrivateProfileStringW(L"MakeCommandLineTests", sInputKey, nsnull,
                                  sInputVal, MAXPATHLEN, inifile)) {
      if (i == 0 || argc > 2 && _wcsicmp(argv[1], L"-check-one") == 0) {
        if (argc > 1 && _wcsicmp(argv[1], L"-check-one") == 0 && argc == 3) {
          wprintf(L"\nERROR: either the TestXREMakeCommandLineWin.ini file doesn't exist\n");
          wprintf(L"       or the test is not defined in the MakeCommandLineTests section.\n\n");
          wprintf(L"File: %s\n", inifile);
        } else {
          wprintf(L"*** TEST-FAIL | %s\n", LOG_PREFIX);
          wprintf(L"*** Either the TestXREMakeCommandLineWin.ini file doesn't exist\n");
          wprintf(L"*** or it has no tests defined in the MakeCommandLineTests section.\n");
          wprintf(L"*** File: %s\n", inifile);
        }
        return 4;
      }
      break;
    }

    GetPrivateProfileStringW(L"MakeCommandLineTests", sOutputKey, nsnull,
                             sOutputVal, MAXPATHLEN, inifile);
    GetPrivateProfileStringW(L"MakeCommandLineTests", sPassesKey, nsnull,
                             sPassesVal, MAXPATHLEN, inifile);

    rv |= verifyCmdLineCreation(sInputVal, sOutputVal,
                                (_wcsicmp(sPassesVal, L"false") == 0) ? FALSE : TRUE,
                                i);

    if (argc > 2 && _wcsicmp(argv[1], L"-check-one") == 0) {
      break;
    }
  }

  if (rv == 0) {
    wprintf(L"*** TEST-PASS | %s | all tests passed\n", LOG_PREFIX);
  } else {
    wprintf(L"*** TEST-FAIL | %s | some tests failed\n", LOG_PREFIX);
  }

  return rv;
}