drivers/cfb_console.c: set SHORTSWAP to swap nibbles
  [ clean this up when and if HWSWP is confirmed ]
drivers/s3c2410_fb.c (video_hw_init): set HWSWP in LCDCON5
drivers/s3c2410_fb.c (video_hw_init): use memset instead of open-coded
   equivalent

- Werner Almesberger <werner@openmoko.org>

Index: u-boot/drivers/cfb_console.c
===================================================================
--- u-boot.orig/drivers/cfb_console.c
+++ u-boot/drivers/cfb_console.c
@@ -315,6 +315,11 @@ void	console_cursor (int state);
 #define SHORTSWAP32(x)	 (x)
 #endif
 
+#ifdef CONFIG_VIDEO_S3C2410
+#undef SHORTSWAP32
+#define	SHORTSWAP32(x)	((((x) & 0xffff) << 16) | (((x) >> 16) & 0xffff))
+#endif
+
 #if defined(DEBUG) || defined(DEBUG_CFB_CONSOLE)
 #define PRINTD(x)	  printf(x)
 #else
Index: u-boot/drivers/s3c2410_fb.c
===================================================================
--- u-boot.orig/drivers/s3c2410_fb.c
+++ u-boot/drivers/s3c2410_fb.c
@@ -47,7 +47,6 @@ void *video_hw_init (void)
 	struct ctfb_res_modes *res_mode;
 	struct ctfb_res_modes var_mode;
 	unsigned char videoout;
-	unsigned int *vm;
 
 	/* Search for video chip */
 	printf("Video: ");
@@ -148,7 +147,7 @@ void *video_hw_init (void)
 	lcd->LCDCON2 = 0x019fc3c1;
 	lcd->LCDCON3 = 0x0039df67;
 	lcd->LCDCON4 = 0x00000007;
-	lcd->LCDCON5 = 0x0001cf08;
+	lcd->LCDCON5 = 0x0001cf09;
 	lcd->LPCSEL  = 0x00000000;
 
 	lcd->LCDSADDR1 = LCD_VIDEO_ADDR >> 1;
@@ -164,10 +163,7 @@ void *video_hw_init (void)
 	}
 
 	/* Clear video memory */
-	i = pGD->memSize/4;
-	vm = (unsigned int *)pGD->frameAdrs;
-	while(i--)
-		*vm++ = 0;
+	memset(pGD->frameAdrs, 0, pGD->memSize);
 
 	/* Enable  Display  */
 	lcd->LCDCON1 |= 0x01;	/* ENVID = 1 */